Go Back   The Cosmetics Forum > Makeup Discussion > Foundation

Reply
 
LinkBack Thread Tools Display Modes

  #1 (permalink)  
Old 09-29-2008, 06:14 PM
Tutti_Frutti_xx Tutti_Frutti_xx is offline
Junior Member
 
Join Date: Sep 2008
Posts: 1
Default Need A Good Foundation And Powder!?

Hi i have used quite a few different foundations and powders up until now, ut i have found that they wear off quite quickly! I always have to keep reapplying it at school. So if anyone has any good not excessively priced makeup ideas please tell me! thanks xx btw i am english so with all respect to all the americans, australians etc out there i really would appreciate recommendations in Pounds (£) please x


Reply With Quote

  #2 (permalink)  
Old 09-29-2008, 06:15 PM
Flick Flick is offline
Junior Member
 
Join Date: Sep 2008
Posts: 1
Default

It might be a bit pricey, but the True Minerals makeup (Loreal?) is a brilliant foundation - and you don't need poweder and it lasts for ages (the whole thing I mean not just the daily application - although it does that too)

It's about £13.00 but to be fair, it will be cheaper in the long run and gives a great finish. I hate paying a fortune for make up but I was persuaded to try this and now, I wouldn't buy anything else.
Reply With Quote

  #3 (permalink)  
Old 09-29-2008, 06:15 PM
Limey.xox Limey.xox is offline
Junior Member
 
Join Date: Sep 2008
Posts: 1
Default

i use maxfactor miracle touch liquid illusion foundation which i like and stays on for me, but its £11.95 in superdrug :\
i use rimmel stay matte pressed powder aswell which i like, and i saw it in a magazine the other day, and its like £4 ish

x
Reply With Quote

  #4 (permalink)  
Old 09-30-2008, 10:54 PM
fghi222 fghi222 is offline
Senior Member
 
Join Date: May 2008
Posts: 2,449
Cool 回流焊

回流焊  回流焊波峰焊是对应的,都是将元器件焊接到PCB板材上,回流是对表面帖装器件的,而对插接件使用波峰焊。回流焊的最简 单的流程是丝印焊膏--贴片--回流焊,其核心是丝印的准确,对贴片是由机器的PPM来定良率,回流焊是要控制温度上升和最高温度及下降温 度曲线(通常无铅的耐热讨论就是对这里来讲的)。  回流焊__是靠热气流对焊点的作用,胶状的焊剂(锡膏 )在一定的高温气流下进行物理反应达到SMD的焊接;因为是气体在焊机内循环流动产生高温达到焊接目的,所 以叫"回流焊"  而波峰焊__是让插件板的焊接面直接与高温液态锡接触达到焊接目的,其高温液态锡保持一 个斜面,并由特殊装置使液态锡形成一道道类似波浪的现象,所以叫"波峰焊"
Reply With Quote

  #5 (permalink)  
Old 10-04-2008, 04:49 AM
fghi222 fghi222 is offline
Senior Member
 
Join Date: May 2008
Posts: 2,449
Cool 搬运车

  搬运车 即起搬运货物作用的物流搬运设备。  手动托盘搬运车 在使用时将其承载的货叉插入托盘孔内,由能力驱动液压系统来实现托盘货物的起升和下降,并由人力拉动完成搬 运作业。它是托盘运输工具中最简便、最有效、最常见的装卸、搬运工具。  防爆搬运车(油桶搬运车)  拼音:fangbaobanyunche  英文名称:explosion-proof handling car  说明:具有防爆性能的一类搬运车。主要有蓄电池防爆叉车和蓄电池防爆搬运车。对于火花、静电、温 度等引起爆炸的因素作了全面处理。电机、电器都设计为隔爆型,电源装置设计为防爆特殊型。适用于石油、化工 、纺织、制药、食品、国防等工业部门存在有爆炸性气体混合物的危险场所,用来进行货物的装卸、搬运、堆码等 操作。  电动搬运车 (automated guided vehicle,简称AGV),为一工业应用中不需驾驶员的搬运车,以可充电之蓄电池为其动力来源。一般可 透过电脑来控制其行进路线以及行为,或利用电磁轨道(electromagnetic path-following system)来设立其行进路线,电磁轨道黏贴於地板上,无人搬运车则依循电磁轨道所带来的讯息进行移动与 动作。
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads for: Need A Good Foundation And Powder!?
Thread Thread Starter Forum Replies Last Post
is mineral foundation powder as good as foundation? Louise M Foundation 2 07-07-2008 11:25 AM
Is fresh complexion pocket powder foundation a good foundation? straight up polak Foundation 2 06-17-2008 04:27 PM
looking for a good loose powder to set makeup. and a good foundation or lola325 Foundation 5 04-13-2008 11:58 AM
is powder foundation good better or worse than regular foundation ? mcrluver Foundation 2 02-15-2008 11:51 PM
Foundation powder or pressed powder is good? Starry Foundation 0 12-31-2007 07:16 AM



All times are GMT -5. The time now is 07:38 AM.

Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.0.0 RC8 ©2007, Crawlability, Inc.